Our shopping cart functionality for sample purchasing is not working. Get FREE SAMPLES for any Fasade Product at our other website: DIYdecorStore.com, or call 1.800.434.3750.
The wall that you plan to install wall panels on needs to be freshly cleaned, free from dust, grease, wax, etc. After you've cleaned the wall, be sure that it is dried thoroughly. Acceptable substrates are drywall, plaster or clean, smooth tile. Any damaged, loose or uneven areas must be repaired, patched, leveled and primed. Fill cracks and irregularities with wallboard compound or spackling, then sand smooth with fine-grade sandpaper. Any porous material like highly textured drywall, plywood (or any raw wood without primer), and wallpaper unless removed, sanded and primed, will result in adhesive failure.
To cut the wall panels use a utility knife, scissors or a tin snips.
The preferred method for installing panels is to use a notched trowel (1/4" x 1/4" x 3/4") and apply the adhesive directly to the wall. ACP, the manufacturer of Fasade recommends using PL Premium. Please see the installation guide for specific instructions.
If using the tube adhesive to install the wall panels, one 10.5-ounce size tube covers approximately one 4' x 8' wall panel. Be sure to carefully read the instructions on the back of the adhesive tube before use.
Edge J-Trim for walls is an 48-inch trim piece that is available to you to use on the edge of your wall panels. The trim is not required to be used with the wall panels, but does give the wall panels a nice, finished look. The trim pieces are available in the same colors as the wall panels.
Inside Corner Trim is an 48-inch trim piece that is available to use on an inside corner of your wall panels. The trim is not required to be used, but does give the wall panels a nice, finished look. The trim pieces are available in the same colors as the wall panels.
Once you have your wall panels installed, the panels can be cleaned with soap and water only. Any harsh abrasives will damage the finish on the tiles.
To install wall panels, you will need the following:
If some of the adhesive has dried on the finish side of the panels, you can use mineral spirits to remove it. Mineral spirits is the only thing you can use that won't damage the panel's finish.
No, the thickness and weight of the 4'x 8' panels causes them to fall off ceiling surfaces before the adhesive can set. Please only use 2'x 2' or 2'x 4' glue up ceiling panels for ceilings.
Yes, you can use on the interior of your camper and we recommend using method 2 of our installation guide which states to use supplemental adhesive due to road vibrations and temperature swings.
Yes. Our Matte White panels are paintable.
To paint our white ceiling tiles, the recommended paint and preparation steps are below. For proper adhesion, be sure to complete both preparation steps:
|Manufacturer||Paint||Preparation 1||Preparation 2||Application Type|
|Sherwin Williams||Acrolon 218HS||SSPC-SP1Solvent Cleaner||DTM Bonding Primer||Brush, Spray & Roller (for specific type, see data sheet) https://www.dot.ny.gov/divisions/engineering/technical-services/technical-services-repository/details/acroltech.pdf|
|Lowes||Signature Interior or
|TSP Cleaner||Plastic Primer Spray||Premium quality roller,
Polyester Brush, or
|Benjamin Moore||Benjamin Moore
Latex or Oil Paint
|TSP Cleaner||Fresh Start Primer||Latex or oil paint: nylon/polyester professional brushes or shed-resistant professional roller covers|
|Pratt & Lambert||Pratt & Lambert Latex
|Scuff Sanding or TSP Cleaner||Supreme Interior /
Exterior Multi Purpose
|Brush: Nylon or Polyester
Roller: 3/8” nap cover
|Dutch Boy||Dutch Boy Platinum||Clean & Degrease||None||Brush: Nylon or Polyester Roller: 3/8” nap cover|
|Conco||Interior/Exterior DTM ALKYD Gloss Industrial Enamel (8500 SERIES) or Interior/Exterior DTM Acrylic Gloss Industrial Enamel (8000 SERIES)||Clean & Degrease||Interior/Exterior DTM ALKYD Rust Control Metal Primer (P851) or Interior/Exterior DTM Acrylic Prime & Finish (P801)||Brush: Nylon or Polyester Roller: 3/8” nap cover|
|Rust-Oleum||Rust-Oleum Universal and Painter's Touch 2X aerosols||Clean & Degrease||None||Brush: Nylon or Polyester Roller: 3/8” nap cover|
Our Customer Service Team is available to assist you Mon-Fri 7am-4:30pm (CST)
Call us at 920.886.6755Send Email